How to Convert Mebibytes to Kibibytes (MiB to KiB)
Data conversions explain why a 1 TB drive shows less space on your computer and help compare mobile plans sold in gigabytes. This guide shows how to convert mebibytes into kibibytes by hand, with examples and a quick-reference table.
The conversion
To convert mebibytes to kibibytes, multiply the value by 1,024. To go the other way, divide by the same number (or multiply by 0.0009765625). For a quick estimate, multiply by about 1,000.
Kibibytes = mebibytes × 1,024
Worked examples
- 3 MiB = 3,072 KiB
- 12.5 MiB = 12,800 KiB
- 75 MiB = 76,800 KiB
Mebibytes to Kibibytes table
| Mebibytes | Kibibytes |
|---|---|
| 1 MiB | 1,024 KiB |
| 2 MiB | 2,048 KiB |
| 5 MiB | 5,120 KiB |
| 10 MiB | 10,240 KiB |
| 20 MiB | 20,480 KiB |
| 25 MiB | 25,600 KiB |
| 50 MiB | 51,200 KiB |
| 100 MiB | 102,400 KiB |
| 250 MiB | 256,000 KiB |
| 500 MiB | 512,000 KiB |
| 1,000 MiB | 1,024,000 KiB |
Common questions
Is MiB to KiB exact?
The factors used here are the internationally defined values where they exist; results are rounded for display only.
How do I convert back?
Use the Kibibytes to Mebibytes converter.
Mistakes to avoid
Multiplying when you should divide
Converting to a smaller unit gives a bigger number, and converting to a larger unit gives a smaller one. If your answer moves the wrong way, you have inverted the factor.
Dropping the units
A bare number without a unit is easy to misread later. Always write the unit with the result.
Rounding the factor too early
Using 3 instead of 3.28 for feet per metre introduces an error of almost 9% before you have started.
Background
For everyday use, three or four significant figures are usually enough. Engineering, science and trade documents may need more, and rounding should happen only at the end of a calculation.
Unit conversion is simply multiplication by a fixed ratio. The ratio between two units of the same quantity never changes, so once you know it you can convert any value in either direction.
Writing the units next to every number while you work is the simplest way to avoid mistakes. If the units do not cancel to leave the one you want, the calculation is set up wrongly.
For any value, use the Mebibytes to Kibibytes Converter or browse all data storage converters.
Run your own numbers: Mebibytes to Kibibytes Converter