How to Convert Yards to Metres (yd to m)
Length conversions come up when reading overseas furniture specs, cycling the Round Island Route in kilometres while a foreign app shows miles, or checking marine distances in the Singapore Strait in nautical miles. This guide shows how to convert yards into metres by hand, with examples and a quick-reference table.
The conversion
To convert yards to metres, multiply the value by 0.9144. To go the other way, divide by the same number (or multiply by 1.0936132983). For a quick estimate, multiply by about 0.91.
Metres = yards × 0.9144
Worked examples
- 3 yd = 2.7432 m
- 12.5 yd = 11.43 m
- 75 yd = 68.58 m
Yards to Metres table
| Yards | Metres |
|---|---|
| 1 yd | 0.9144 m |
| 2 yd | 1.8288 m |
| 5 yd | 4.572 m |
| 10 yd | 9.144 m |
| 20 yd | 18.288 m |
| 25 yd | 22.86 m |
| 50 yd | 45.72 m |
| 100 yd | 91.44 m |
| 250 yd | 228.6 m |
| 500 yd | 457.2 m |
| 1,000 yd | 914.4 m |
Common questions
Is yd to m exact?
The factors used here are the internationally defined values where they exist; results are rounded for display only.
How do I convert back?
Use the Metres to Yards converter.
Mistakes to avoid
Dropping the units
A bare number without a unit is easy to misread later. Always write the unit with the result.
Multiplying when you should divide
Converting to a smaller unit gives a bigger number, and converting to a larger unit gives a smaller one. If your answer moves the wrong way, you have inverted the factor.
Rounding the factor too early
Using 3 instead of 3.28 for feet per metre introduces an error of almost 9% before you have started.
Background
Many conversion factors are exact by definition. The inch has been defined as exactly 2.54 centimetres since 1959, and the pound as exactly 0.45359237 kilograms, so conversions involving them can be as precise as you need.
Writing the units next to every number while you work is the simplest way to avoid mistakes. If the units do not cancel to leave the one you want, the calculation is set up wrongly.
For everyday use, three or four significant figures are usually enough. Engineering, science and trade documents may need more, and rounding should happen only at the end of a calculation.
For any value, use the Yards to Metres Converter or browse all length converters.
Run your own numbers: Yards to Metres Converter